Lumia 520 RM-914 Nokia Dead boot Firmware

Prepared the following 



1. Windows Device Recovery Tool

2. CMD (command prompt windows 7 32bit)

3. Make sure battery is atleast 50% charge

4. Package Firmware FFU you can download Here

5. Create folder C:/rm914 and copy the HEX file and MBN file also VPL and FFU

and rename the FFU files to 1.ffu

6. Also internet connection

7. create folder name dump in C:\ it should be C:\dump

8. Dead Lumia phone (emergency boot driver)

First instal windows device recovery tools if update ask its automatically update.

Search the cmd.exe to windows system folder

then copy to (X:\Program Files\Microsoft Care Suite\Windows Device Recovery Tool ) X is your destination Program.

Open CMD.EXE that copy earlier in program files

We start now to create 2 files need to flash the emergency mode of  lumia deadboot

This command line to extract gtp0.bin from ffu image in C:/rm914

write this command on cmd.exe

thor2 -mode ffureader -ffufile "C:\rm-914\1.ffu" -dump_gpt -filedir C:\dump

Connect the lumia phone with battery to PC usb then press enter to start cmd.exe

Its create two files gpt0.bin and gpt1.bin in C:\dump

this command will create gpt0.bin and rename it as msimage.mbn

1.Now you have  msimage.mbn

2. Need also HEX file to revive a deadboot lumia phone

Hex file example mine is FAST8930_FAME_ROW.hex i download that i told above have  Package Firmware FFU.

Rename the FAST8930_FAME_ROW.hex to HEX.hex

Copy the 2 files  (msimage.mbn and HEX.hex) to (X:\Program Files\Microsoft Care Suite\Windows Device Recovery Tool ) X is your destination Program.

Reopen CMD.EXE  again write this command to flash the hex and mbn to device

thor2 -mode emergency -hexfile HEX.hex -mbnfile msimage.mbn -orig_gpt

 Connect the lumia phone with battery to PC usb then press enter to start cmd.exe

Note : The result may be like this as many i try depending of models

* NO_CONNECTION_FOUND means Phone not detected

issue is no proper driver or proper connection

* ERROR_MSG_SEND_RECEIVE_FAILED 

means hex file not working ,Maybe wrong Hex file you download

* SAFE hex file was used and unallowed memory address was being written
PROBABLY means bootloader flashed
Reboot the phone (pull usb and battery out)
If you still get QHSUSB, try again. 

Its lucky if  one try flash its success

You should get Red screen in 8 tries to write this command in cmd until its vibrate

Note : Don't remove battery within 5-8 tries in every flashing this command

If you succeed, The Red Screen with NOKIA logo appear, Congratulation ! the phone is unbrick

its revive now from deadboot (emergency boot),

Now flash the VPL file ,Write this command to cmd.exe 

thor2.exe -mode vpl -maxtransfersizekb 1 -vplfile C:\rm914\yourfile.vpl

don't disconnect battery press hold volume down+power in 10seconds until its off  then

remove press power don't remove volume down then press again the power button 

remove all press when its vibrate then connect to PC usb then hit start the cmd.exe

After flash success the vpl proceed now to FULL flash program the phone by using 

windows device recovery tools

Open this tool close all cmd command then re insert the phone in power off mode

the Tools automatic flash the phone it takes time to upgrade via live update

For Professional technician it can browse it the entire firmware by using setting in this tools

but need same product code given that you can see in back housing sticker on device

The product code package firmware and the product code that detect automatically by windows device recovery tools must be same to order to use this action to flash offline the lumia phone

or if this not same, result its deadboot emergency boot again Do it at your own risk

Prepared and Tested by 

phoenixemer 

Eddzyyelly