WIKO PULP FAB 4G FIRMWARE ROM

Navigation, sharing, gaming... the PULP FAB 4G will satisfy all your requirements. Its Qualcomm® Snapdragon™ 410 1.2 GHz Quad-Core processor and 2 GB RAM make Lollipop dance. If 16 GB ROM are not enough, you can expand the storage memory up to 64 GB via micro SD! The PULP FAB 4G also comes with a dual SIM slot.

NETWORK : 4G LTE 800/1800/2100/2600 MHz
H+/3G+/3G WCDMA 900/1900/2100 MHz
GSM/GPRS/EDGE 850/900/1800/1900 MHz
DATA SEGMENT : FDD-LTE Cat. 4, DL 150 Mbps, UL 50 Mbps
OPERATING SYSTEM : Android™ 5.1 (Lollipop)
PROCESSOR : Qualcomm® Snapdragon™ 410 MSM8916, Quad-Core, 1.2 GHz, Cortex-A53
DESIGN : Touch screen
SIM CARD : 2 Micro SIM
AVAILABLE COLORS : Black, White, Chocolate, Electric Blue, Flashy Red
SIZE : 155.4x79.3x8.5 mm
WEIGHT : 168 g (with battery)
BATTERY : 2820 mAh Li-Po
STAND-BY TIME : Up to 259h
TALK TIME : Up to 27,58h (2G), Up to 20,8h (3G)
ROM : 16 GB
RAM : 2 GB
EXTERNAL MEMORY : Micro SD up to 64 GB
ACCELEROMETER : Yes
MAGNETIC SENSOR : Yes
PROXIMITY SENSOR : Yes
LIGHT SENSOR : Yes

Updates support credit to WIKO MOBILE

DOWNLOAD:  V.25 ANDROID LOLLIPOP

Flashing :  GUIDE

Another Firmware may you download from firmware file HERE

Firmware can use to same model about have problem about software related problem Hang, no power, password, pattern lock , infected by virus, anything about software related.

Best safe way is manual select flash the SYSTEM ANDROID file only.

Do it at your own risk, After flashing ! the device is set automatic in reset condition, All user data is lost.

Make sure back-up important data before to proceed flashing your phone.