Samsung Galaxy J3 Pro Firmware File Download and Installation Guide

Samsung Galaxy J3 Pro 

About Samsung Galaxy J3 Pro : Samung Galaxy J3 Pro Released on 2016 June.The device comes with Android Lollipop 5.1.The Internal Storage of the device is 16GB(Micro SD Card Slot is available).The size of the touchscreen display is 5.0 inches which is Super AMOLED Capacitive  Touchscreen(Corning Gorilla Glass ).When its come about Camera the Primary Camera of the device is 8Megapixel and the Secondary Camera of the device is 5Megapixel.The Samsung Galaxy J3 Pro comes with 2GB of RAM with Quad-Core 1.2Ghz Processor(Snapdragon 410).Battery that comes with Samsung Galaxy J3 Pro is 2600mah (Li-lon)and the Battery is removable.The device comes with Dual SIM (Nano-SIM).Networks-GSM-3G-4G.Connectivity features includes-Wifi-Bluetooth -NFC-Radio-Micro USB.

Get Samsung Galaxy J3 Pro Amazon :  Samsung Galaxy J3 Pro

Samsung : Samsung is a South Korean multinational conglomerate headquartered in Samsung Town, Seoul. It comprises numerous affiliated businesses, most of them united under the Samsung brand, and is the largest South Korean chaebol.

You need to know 
If you are searching Firmware file for your Samsung Galaxy J3 Pro then you are one the right place because TechNationBH is providing the correct firmware for you,we will give everything what is necessary to  Flash the device and we will try our best to give you the right Firmware Files.

Firmware Details 

1. File Type : CTC-J3119KEU1APG1-20160804143226.zip 
2. Model : Samsung Galaxy J3
3. Vesrion : Android Lollipop OS v5.1.1

Note : If your brick your device then TechNationBH Will not be responsible for that so,please do it at your own risk.

Firmware Download And Some Requirements For Samsung Galaxy J3 Pro

Samsung Galaxy J3 Pro Firmware File Download
Size  : 1.12B(Rapidgator)

Odin Download

Winirar Download (If Required)

To Install the Firmware File via ODIN.

• First get your device into download mode, to do that first switch of your device then press volume Down/Power Button Simultaneously for 3-2 seconds.
• Once you get your device into download mode connect your device into your computer via USB cable.
• After adding your device to your computer using a data cable.Open ODIN you will see the "ADDED message and the ID COM : FIELD box will turn into yellow or blue. If doesn't work try installing Samsung USB drivers again on your computer and restart your computer and do the same process again.
• Once your device is successfully added to the ODIN  
• Then click on the PA box and select the firmware file, that you have downloaded recently.
• After that click on start box and wait until the update process is completed.

If you have any Question about this Firmware please feel free to leave a comment in the comment section

Thank you