Huawei P9 Plus Fimware File:
 |
Huawei P9 Plus |
Huawei P9 Plus About Detailes:
The ROM packs with the latest Android 6.0.1 Marshmallow firmware which is based on the latest EMUI 4.1 OS. If you want to flash stock firmware on Huawei P9 Plus for any reason, then you are in right place.
If you own the device then you will receive a notification about the update, but the device should have a locked bootloader if the bootloader is unlocked or device is rooted then you are not going to get any notification.You can update via OTA (Over-the-air).But if the update is not available in your region then you can wait for the update to come or you can Update Huawei P9 Plus to Marshmallow (EMUI 4.1) Manually.Just follow the given steps to safely Flash.
Huawei P9 Plus is a flagship device from Huawei. The Mobile Network GSM/HSPA/LTE. Huawei Mobile The phone features a 5.20-inch FHD display with a resolution of with 1080 x 1920 pixels. Single SIM Nano-SIM) or Dual SIM Nano-SIM, dual stand-by.Fimware Platfrom Android OS, v6.0 Marshmallow.All Most Memory Support microSD, up to 256 GB uses SIM 2 slot. Internal Memory 64 GB, 4 GB RAM. Camara Dual 12 MP, f/2.2, 27 mm, Leica optics, phase detection & laser autofocus, dual-LED (dual tone) flash Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass The Mobile battery Non-removable Li-Po 3400 mAh battery...
IMPORTANT:
Make sure there is at least 80%-70% battery left on your smartphone before beginning the process.This firmware update is only for Huawei P9 Plus.This Firmware file is only for Huawei P9 Plus L09. Don’t try this on any other device.Your device must be on stock firmware and stock recovery.Follow the steps correctly otherwise you may brick your device.We are not responsible for any damage to your phone.It may erase your data so it is advisable to take a complete backup of your phone for safer side.
WARNING:
TechBugBH will not be held responsible for any kind of damage occurred to your
Huawei P9 Plus while following this tutorial.Do it at your own risk.
THANK YOU
0 comments:
Post a Comment