Samsung Galaxy J5 Prime Fimware File

Samsung Galaxy J5 prime Rom Download:

Samsung Galaxy J5 Prime

The stock firmware of Galaxy J5 Prime is available here. It’s the latest build Android 6.0.1 of Marshmallow. You can download and flash Samsung Galaxy J5 Prime SM-G570F stock firmware using the link below. We have also shared the installation instructions which you can use after downloading. First, download the stock firmware and then use the steps mentioned underneath to flash it.

1. Make sure you have installed Samsung USB Drivers on your PC, if not you can download it at http://developer.samsung.com/technical-doc/view.do?v=T000000117 and then install it on your PC
2. Download ODIN software and install it. Download at http://odindownload.com/SamsungOdin/
3. Download stock firmware at https://samsung-firmware.org/model/SM-G570F/region/INS/ and extract it.
4. Run Odin software.
5. Boot your device to Download Mode: How to enter Download Mode “Turn off the device, Press and hold Volume Down key + Home key and then press and hold Power key. Release all key when Samsung logo appears on the screen”.
6. Connect your device to PC via the USB cable while in download mode.
7. Next, make sure to check the “Auto Reboot” and “F. Reset Time” options only in Odin Tool.
8. Hit the AP/PDA button then browse and select a tar.md5 firmware file from the extracted folder.
9. Finally press the start button to begin flashing the firmware update on your device.
10. Make sure you have installed Samsung USB Drivers on your PC, if not you can download it at http://developer.samsung.com/technical-doc/view.do?v=T000000117 and then install it on your PC
11. Download ODIN software and install it. Download at http://odindownload.com/SamsungOdin/
12. Download stock firmware at https://samsung-firmware.org/model/SM-G570F/region/INS/ and extract it.
13. Run Odin software.
14. Boot your device to Download Mode: How to enter Download Mode “Turn off the device, Press and hold Volume Down key + Home key and then press and hold Power key. Release all key when Samsung logo appears on the screen”.
15. Connect your device to PC via the USB cable while in download mode.
16. Next, make sure to check the “Auto Reboot” and “F. Reset Time” options only in Odin Tool.
17. Hit the AP/PDA button then browse and select a tar.md5 firmware file from the extracted folder.
18. Finally press the start button to begin flashing the firmware update on your device.

Stock Marshmallow Firmware for Galaxy J5 Prime:

Check your device model number from Settings> About device, then download the specific firmware for your device.

 
SM-G570F (Galaxy J5 Prime)-Download Here
SM-G570M (Galaxy J5 Prime)-Download Here
SM-G570Y (Galaxy J5 Prime)-Download Here  

• Backup your entire data on the device before proceeding.
• At least 70% charge the device battery before starting the process.
• Install USB driver of Samsung at your windows PC. |Download Link
• Enable USB Debugging Mode and OEM Unlock at device’s Settings > Developer options.
• Download Odin tool in the PC and then extract. | Link

Note: The Galaxy J5 Prime SM-G570F Stock Firmware can only be used for the variants mentioned here. Don’t flash on any other device. Proceed carefully step by step and only at your own risk.