This Firmware i search on net and already used to model Sony clone XBO model O6.
I find that this ROM scatter it same to my repair, But not sure if this same version,
As a same if i work, when i program device i back-up full first the Firmware of my repair before flash the ROM i use for future purposes if i encountered problem after flashed.
This is information of ROM of device when client arrive on my repair shop using CM2 MTK tools.
NAND Flash : NOT INSTALLED
eMMC Flash : 3701FF454D4330344710F6001A8023B3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x37 , OEM : 01FF
[eMMC] : FLASH_INF : [NOT_IN_BASE] , G40CM
[eMMC] : FLASH_CID : 3701FF454D4330344710F6001A8023B3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID : 0xDABB189FB25EDC83EFEA22BD0F090B00
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : O6
ProdName : O6
ProdModel : O6
Device : O6
AndroidVer: 6.0
MTKxPRJ : ALPS.L1.MP6.V2_MAGC6580.WE.L_P20
I search on Net and i lucky i found this sony o6 clone a.k.a X-B0.rar.
I flash this Firmware as MOTA SU LIKE via SP flash TOOL which is found below.
And the result is OK because it not touch any calibration data on phone only boot,recovery and system only was program it.
If you encountered error about loading scatter try to delete the checksum.ini inside folder you download.
Be sure you read and understand the information/Version ROM backup Firmware
and step by step before proceeding to program your device.
Do it at your own risk, After flashing ! the device is set automatic in reset condition, All user data is lost.
Make sure back-up first before to proceed flashing your phone.
Download scatter file
⇩Sony O6 clone XBO.rarRar password
No password
0 comments:
Post a Comment