Latest Update 23-06-2017,
Samsung Galaxy S8 Charging Problem Solution Ways
This problem is may cause by faulty components on Samsung Galaxy S8 PCB board. Here is the solution for Samsung Galaxy S8 G950F Not Charging problem like there is No Charging indication shows on the display when the battery charger is being a plug-in.This problem may sometimes happen if the device suffered wet or water damaged or just exist.Samsung Galaxy S8 G950F Charging Ways Not Charging Problem Repair Solution Charging Jumper Fake Charging.
Trace each of the connection line paths from USB pins down to the components where it is directly connected.Before proceeding, ensure that the battery and the battery charger are in good working condition.and filter coil for possible open or short circuit.
Solution Ways:Check the charging (+) and (-) line paths are short using a Multimiter if it shows short them, remove/replace the diode, capacitors and filters. also, replace the fuse.Before doing, Be sure to check the battery and charger are Exactly working condition. then verify the phone’s USB pin connector is broken or any fault.
Repair hints for Samsung Galaxy S8 G950F Not Charging Problem:
Check/ replace the fuse and the chip diode.
Check/replace the highlighted transistor, and capacitor.
If the above procedure won’t Fix problem the possible faulty Charging IC.Try to use another working charger.
Check, clean or replace the charging pin connector if oxidized.
Clean the charging pin connector terminal contact pads.
Reheat,Re work charging ic, replace if necessary.
Connect Use:We support every Android device available and we are serious about what we do. But rest assured we read every message we receive.This is a free service we offer and we won’t charge you a penny for it. But please note that we receive hundreds of emails every day and it’s impossible for us to respond to every single one of them.We are always open to your problems, questions, and suggestions, so feel Free to send them atprateet000@gmail.com. For those whom we’ve helped, please spread the word by sharing our posts with your friends.
0 comments:
Post a Comment