Latest Update 11-06-2017,
Wiko U Feel Firmware Flash File
Do you know this Wiko U Feel Firmware how to Update /Install? If your mobile phone forget your pin coed or Password you can this problem solved very simple this Wiko U Feel Firmware Free Download or Update. Wiko U Feel Firmware you can very simple Install or Update any link. This Wiko U Feel Firmware is most important for your mobile device. If your Wiko U Feel mobile phone any cast off or hang then your need this Wiko U Feel Firmware File.This Wiko U Feel Firmware helps your mobile device.Wiko U Feel Firmware Flash File
Do you know this Wiko U Feel Firmware Flash File working very first. This Wiko U
Feel Firmware Flash File is helps your mobile device. Wiko U Feel Firmware Flash File use meney pepule because this Firmware Flash File working 100%.
1.Wiko U Feel is the latest Phone that released by india And All Country local giant
2.So it’s a decent smartphones which offers all basic configurations.
3.However, if you are looking for a smartphone.
2.So it’s a decent smartphones which offers all basic configurations.
3.However, if you are looking for a smartphone.
Download Fimware:
This Wiko U Feel Firmware Download only on Wiko U Feel you don’t try any other device.
You can this Wiko U Feel Firmware Free Download
You must have device driver Install/Update your pc or your android mobile phone.
You must click Update or Install any other link.
Wiko U Feel Firmware you can very simple Free Download another link.
How To Flash Wiko U Feel
First, you need to download and install sp flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SPflash tool.exe
When sp flash tool open, go to download button in sp flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in sp flash tool
Close sp flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SPflash tool.exe
When sp flash tool open, go to download button in sp flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in sp flash tool
Close sp flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.
Note: Android Wiko U Feel Firmware Flash File is Released only Android Wiko U Feel Firmware Flash File. So you Don’t trey this tutorial use any other Android device.And Any Damage your not Responsable TechBugBh .Thank You
0 comments:
Post a Comment