General SP MultiDownloader for Broadcom Device

Broadcom MultiDownloader is a flash burn tool for production line.
 Figure 1: Broadcom MultiDownloader Main GUI





Figure 2: Configuration setting to load the Firmware image.

Little few device phone model uses this kind chipset what called it Broadcom integrated circuit.
But nothing different on using other free tools, The firmware is for whole folder, Example is Your ROM folder

Install the Driver of your Phone (If you have already driver ignore this part)

   Refer this TAB, if you don't have click here and to download Broadcom drivers.

Load the Firmware

1. Select “Setting->Configuration” to enter setting dialog. 2. Image Path: Click “...” button.
3. Select your image folder.

How to download

Double Click open Download tool named Broadcom MultiDownloader.exe, 

Click  setting tab button

Then will Pop-up dialog box , And select your image folder.

If an up level folder selected, tool will search all image package contained.

And list all packages for your selection 

select Clean whole flash and download all image files. Don’t keep any data.

Take off the phone battery, unplug the USB cable (make sure the phone is fully power off), then put back the battery, connect the USB cable from the phone to the PC.

make sure you have a proper usb install

Pay attention to message inside red box

Assign this USB port number to any DIAG you want.

Then will  see that the tool detects the device and start flashing the Diag Color will change to yellow.

The Diag color is green means finish.

DownloadMultiDownloader Broadcom Tool