Intex 4g plus has been released on 2015 June.It has 5.00 inch display,Processor 1.3GHZ quad core,Front camera 5 mega pixel,Resolution 720-1280 pixels,RAM 2GB,Storage 16gb,Rear camera 13mp.
Requirements for flashing your device
Firmware file downloads link is given below
Android_Spreadtrum_Driver
USB driver for Intex phones download link is given below
After downloading all those stuffs that you need to flash your device.
1.first extract the firmware that you have downloaded
2.now install the usb drivers on your pc or laptop
3.then install the Android_spreadtrum_driver on your pc.
4.now extract Android_Spreadtrum_Driver and click on Upgrade download.
5. connect your phone to the your PC(please make that your before connecting your device to your PC the device should be switched off)
6.once your device is connected,click on the load packet button and add the firmware file (the firmware file will be named as .pac file)
6.once your device is connected,click on the load packet button and add the firmware file (the firmware file will be named as .pac file)
7.Now click on the start downloading button to begin the flashing process.
8.During installation process your device will restart automatically so don't be panic!!!!!!!!!!! once the green passed messaged is showed that you have succeed to flash your device!!!!!!!!!!
0 comments:
Post a Comment