Home » , » MyPhone Agua RIO Fun Firmware ROM

MyPhone Agua RIO Fun Firmware ROM

Posted by Tech Space Media on Wednesday, February 8, 2017




Hello! Today i share one of mobile i repaired this today, A myPhone model Agua rio Fun model with the problem of bootloop when arrived on my repair shop.

Costumer said: "Before becoming bootloop problem she was on game apps and it was hang on many apps and always always unfortunately stop message come on screen then she restart the phone and after that become Hang and bootloop ,..  can you fix my phone?"
Me :Yes i can fix it! So i have Tested Firmware here and i will reprogram the ROM.
When i check the phone information chipset Nand address via NCK mediatek dongle tools the result below shows.

Action : Boot Info.
 Selected 0-By CPUM 0-By CPUMT6572_NAND
 Exe version: NCKDongle AndroidMTK 2.5.6.2
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 NAND: (4Gb+4096Mb) [KINGSTON] KTN0403CS_TCR1
 BOOT STYLE : NAND BOOT
 Size: 0x20000000       [0.500 GB]
 BlockSize: 4096 SpareSize: 224  BMT Blocks 80
 Searching partiton table, wait..
 [0]Part: ,” À Begin: 0x306ac2c07d45b94 Len: 0x43454843    
 [1]Part: licŒ¾ .f Begin: 0x5f474946011a7c52 Len: 0x5303025c    
 [0]Part: PRELOADER Begin: 0x0              Len: 0x100000      
 [1]Part: PRO_INFO Begin: 0x100000         Len: 0x300000      
 [2]Part: NVRAM Begin: 0x400000         Len: 0x300000      
 [3]Part: PROTECT_F Begin: 0x700000         Len: 0x300000      
 [4]Part: PROTECT_S Begin: 0xa00000         Len: 0x300000      
 [5]Part: SECCFG Begin: 0xd00000         Len: 0x40000      
 [6]Part: UBOOT Begin: 0x474d49         Len: 0x544f4f42    
 Offset: 0x1f554000       Count: 7
 Warning, imei marker not found in nvram, nvram posible damaged
 Warning, nvram posible damaged!!

 If phone have damaged IMEI, write good nvram first.
 Partition table saved to: Android_MTK\partition_tables\
 Wait untill phone will start charging.
You will see the red color  [0]Part: ,” and  [1]Part: licŒ¾ .f  is damage area maybe think is Hardware problem in chipsets address But i try to first make a move it maybe software error
The Firmware ROM i used is not backup of mine but it tested many times to this model.
The Information below show

CPU : MT6572, E01 Mediatek Chipset
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V1.P9
HW_VER : TINNO72_WET_JB3_GPRS_HW
Boot : Nand
Android Version : 4.2
Firmware : Agua_Rio_Fun_20140424_V1.13-ASP

Download Firmware


First attempt to flash phone using firmware there's a failed message of SP flash tool "bad block address detected etc etc.." How i fix it Learn Here at tutorial of sp flash tool in - Added knowledge 4
the tutorial and download -be sure you read carefully before you start your work.

I already backup all thing before i deep format the phone
1. NVram. 
2. security. boot files
3. Imei serial.
After complete flash, the phone have no imei ( invalid imei ) no signal ,no sim detected
 I restore the backup of this 3 file using NCK mediatek Dongle- a paid tools we have on shop to make it useful again and totally fix the phone


0 comments:

Post a Comment

Popular Posts

Blog Archive

.comment-content a {display: none;}